Rottendog Amusements
We are THE Lowest Cost Providers of Replacement Pinball Circuit Boards in the World!
* All of our Boards are Complete Redesigns of Originals *
|
We are THE Lowest Cost Providers of Replacement Pinball Circuit Boards in the World! * All of our Boards are Complete Redesigns of Originals *
|
|
|
Rottendog Amusements "Specials Page" From time to time we get in new boards from our build house (in the USA) that have blemishes, or that require some level of light "rework". To that end, this page is set up to offer factory seconds that come with 100% customer satisfaction. Below, if any, you will find specific boards that meet this criteria along with a brief description as to what made it get to this page. If no boards are listed, that means we do not have any factory seconds currently available. If you are interested in one of the boards, contact us first to see if the board is still available.
ID#030 GDB001 - Boards are from design where there is no LED, works 100% 6/17/2010 = $40 ID#029 MPU326 - Repaired board due to customer damage including jumpers 4/11/2010 = $150 SOLD ID#028 DPS004 - Small burn on board where customer moved jumper 1/20/2010 = $45 SOLD ID#027 WPC089 - Customer blew out ULN2803, very slight burn on board at that location 12/19/2009 = $80 SOLD ID#026 WDB089 - One wire added to front side of the board due to a cut trace 12/19/2009 = $180 SOLD ID#025 WDP011A - Has one wire added to backside of the board due to a cut trace - works 100% 7/20/2009 = $50 SOLD ID#024 DIS089 - Shipping damage to one mounting hole. Can be firmly mounted though 7/15/2009 = $75 SOLD ID#023 DIS089 - Shipping damage to one mounting hole. Can be firmly mounted though 7/15/2009 = $75 SOLD ID#022 DIS089 - Shipping damage to one mounting hole. Can be firmly mounted though 7/15/2009 = $75 SOLD ID#021 WDB089 - One long wire added to backside of the board due to a cut trace 6/14/2009 = $180 SOLD ID#020 DIS244 - Has one wire added to backside of the board due to a cut trace 4/25/2009 = $75 SOLD ID#019 WDB089 - Customer reported problems with +5V reset. Proven fine with our games. - works 100% 4/4/2009 = $125 SOLD ID#018 MPU004 - Has one wire added to backside of the board due to a cut trace - works 100% 3/13/2009 = $125 SOLD ID#017 WDB095 - Build House mounted one connector backward, been reworked - works 100% 3/9/2009 = $125 SOLD ID#016 WPS346 - Old board which uses a bridge rectifier instead of discrete diodes - works 100% 12/12/2008 = $35 SOLD ID#015 WDB089 - One long wire added to backside of the board due to a cut trace 11/23/2008 = $190 SOLD ID#014 PPB001 - Customer return, but checks out fine. Said it blew F7. Works in my TFTC 11/13/2008 = $45 SOLD ID#013 DIS200 - Has one wire added to backside of the board due to a cut trace 11/13/2008 = $75 SOLD ID#012 MPU004 - Has one wire added to backside of the board due to a cut trace 10/16/2008 = $150 SOLD ID#011 DIS240 - Has surface scratches on the displays that are not noticeable when in use 9/20/2008= $75 SOLD ID#010 MPU004 - Has one wire added to backside of the board due to a cut trace 9/20/2008 = $160 SOLD ID#009 WDB089 - Has one wire added to backside of the board due to a cut trace 8/26/2008 = $190 SOLD
Please keep in mind details for these items (if any) can be found on our products page. Also, shipping, and any optional items (i.e. Game ROM, CPU, etc.) are incremental to the price posted above.. |
|
Send mail to
Rottendog with
questions or comments about this web site.
|
